sorry, we have discontinued our partnership with CL*RK and will stop selling TK boards effective immediately.
These are our current remaining stock and once gone, no more will be available.
- MTK series controller uses 10-CH S.BUS RC system to control 1/16 R/C truck forward/backward movement, turning and weapon,
NOTE: this is S-BUS variant and you need to use the FS-i6S radio
available here: https://www.rctanklegion.com/products/flysky-i6s-transmitter-and-receiver-set
- Miniature design allowed your to keep interior of driver cabin,
-Ultrasonic ESC for propulsion motor and steering
- Adjustable ESC start voltage allows you to adjust lowest speed for track motor
-Carefree reversing
-Ultra Low turn-on resistance FET for track motor ESC
-Steering Motor ESC to drive stock steering box,
- ESC/PWM module( EPM) can be used as gun elevation/traverse control or other applications
-Max.3W sound output power,
- V2 Smoker driver
- Safety shutoff prevents unwanted movement while signal lost,
-Maximum of 5channel of sound effect can be generated at the same time, such as
Repairing tank
Machinegun
2nd machine gun
Hydraulic sound( for EPM, Additional ESC )
Turret rotation
Engine start
Engine revving
Engine stop
Turn indicator
Horn
Air discharge
Reverse
Incoming( for IR battle)
Hit( for IR battle)
Destroyed( for IR battle)
MG incoming
MG Hit
Terminology
ESC/PWM module( EPM)is peripheral which allows the user to drive brushed motor or servo motor, In ESC mode, ESC port is enabled, can be used to drive brushed motor, In PWM mode, PWM port is enabled to driver servo motor, sound effect stopped when servo motor reach end point
Accessories (optional, not included)
Part Number | Description |
MTK-RECEIVER | Micro 2.4G S.BUS receiver for FlySky i6s |
MTK-SPK | Speaker with volume control https://www.rctanklegion.com/products/clark-mtk37-3w-speaker-with-3d-printed-case |
MTK-CASE | Casing for MTK37 board and servo steering assembly https://www.rctanklegion.com/products/clark-casing-and-servo-steering-for-wpl-hl-rc-truck-to-match-mtk37-board- |
CAB001 | 1.25mm pitch cable connector for connecting IR LED or Gun Flash LED |
IR Programming Line | 5P connector with IR receiver & Red LED indicator, and a 2.54mm-pitch Jumper https://www.rctanklegion.com/products/ir-receiver-config-kit-for-tk-boards |
for more information;
http://www.clark-model.com/eng/prod_mtk37/index.html