Cart 0
MTK37.jpg

CLARK MTK37 Multi-function board for RC truck (WPL/HL 1/16 scale) S-bus version

RM 409.00


Overview  

- MTK series controller uses 10-CH S.BUS RC system to control 1/16 R/C truck forward/backward movement, turning and weapon, 

NOTE: this is S-BUS variant and you need to use the FS-i6S radio
available here: https://www.rctanklegion.com/products/flysky-i6s-transmitter-and-receiver-set

- Miniature  design allowed your to keep interior of driver cabin,

-Ultrasonic ESC for propulsion motor and steering

- Adjustable ESC start voltage allows you to adjust lowest speed for track motor

-Carefree reversing

-Ultra Low turn-on resistance FET for track motor ESC

-Steering Motor ESC to drive stock steering box,

- ESC/PWM module( EPM)  can be used as gun elevation/traverse control or other applications

-Max.3W sound output power,

- V2 Smoker driver

- Safety shutoff prevents unwanted movement while signal lost,

-Maximum of 5channel of sound effect can be generated at the same time, such as

  • Repairing tank

  • Machinegun

  • 2nd machine gun

  • Hydraulic sound( for EPM, Additional ESC ) 

  • Turret rotation

  • Engine start

  • Engine revving

  • Engine stop

  • Turn indicator

  • Horn

  • Air discharge

  • Reverse

  • Incoming( for IR battle)

  • Hit( for IR battle)

  • Destroyed( for IR battle)

  • MG incoming

  • MG Hit

Terminology

ESC/PWM module( EPM)is peripheral which allows the user to drive brushed motor or servo motor, In ESC mode, ESC port is enabled, can be used to drive brushed motor, In PWM mode, PWM port is enabled to driver servo motor, sound effect stopped when servo motor reach end point

Accessories (optional, not included)

Part Number

Description

MTK-RECEIVER

Micro 2.4G S.BUS receiver for FlySky i6s

MTK-SPK

Speaker  with volume control https://www.rctanklegion.com/products/clark-mtk37-3w-speaker-with-3d-printed-case

MTK-CASE

Casing for MTK37 board and servo steering assembly  https://www.rctanklegion.com/products/clark-casing-and-servo-steering-for-wpl-hl-rc-truck-to-match-mtk37-board-

CAB001

1.25mm pitch cable connector for connecting IR LED or Gun Flash LED
https://www.rctanklegion.com/products/jst-gh-2p-female-plug-with-wire-for-tk-board

IR Programming Line

5P connector with IR receiver & Red LED indicator, and  a 2.54mm-pitch Jumper

https://www.rctanklegion.com/products/ir-receiver-config-kit-for-tk-boards

for more information;
http://www.clark-model.com/eng/prod_mtk37/index.html